Sold By: MJL Bangladesh PLC.
SKU:EG-25-74130
Categories:Oil & Fluids, Additives, Greases & Lubricants, Gear Oils, Power oil, Engine oil, Break oil, Cleaners, Lubricants & Solvents, Cycle Engine Oil
Tags:MJL Bangladesh, 1L Petrol Engine Oil, Mobil 1 0W-20, Full Synthetic Engine Oil, Fuel Efficient Car Oil
Triple Action Power+ | Ultimate Full Synthetic Engine Oil
Mobil 1™ 0W-20 Triple Action Power+ is the ultimate full synthetic engine oil delivering outstanding engine Performance, Protection, and Cleanliness with the added benefit of Fuel Economy.
Features and Benefits
Why these matter for your engine:
Features | Advantages and potential benefits |
PERFORM: Long lasting power. | PERFORMANCE: Reduces the stress of daily wear and harsh conditions for longer engine life. |
PROTECT: 30X* better protection for high temperatures. | PROTECTION: Guards against extreme temperatures to prevent breakdowns. |
CLEAN: Prevents 99.9%** of the harmful acid contaminants that damage your engine. | CLEANLINESS: Prevents buildup of contaminants and sludge for a cleaner engine. |
PLUS: Increases engine efficiency for 8.4%*** improved fuel economy. |
*Based on Sequence IIIH, against API SP specification
**Based on TBN, against TAN in used oil
***Based on comparison of Sequence VIE against similar data of prior generation product recipe.
Applications
Mobil 1™ Triple Action Power+ is suitable for use in petrol, diesel, and hybrid vehicles. Always check your owner's manual for the recommended viscosity grade and specifications for your particular vehicle.
Specifications and Approvals
This product is recommended for use in applications requiring:
FIAT 9.55535-CR1
This product meets or exceeds the requirements of:
Chrysler MS-6395
FORD WSS-M2C962-A1
API SP Resource Conserving
API SP
API SN PLUS
API SN
API SM
ILSAC GF-6A
ACEA C5
Properties and Specifications
Grade | SAE 0W-20 |
Mini-Rotary Viscometer, Apparent Viscosity, -40 C, mPa.s, ASTM D4684 | 13600 |
Pour Point, °C, ASTM D97 | -48 |
Total Base Number, mgKOH/g, ASTM D2896 | 9.2 |
Ash, Sulfated, mass%, ASTM D874 | 0.76 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 | 235 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 | 45 |
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 | 2.6 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 | 8.4 |
Density @ 15.6 C, g/ml, ASTM D4052 | 0.845 |
Viscosity Index, ASTM D2270 | 163 |
Health and Safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx.
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.