Sold By: MJL Bangladesh PLC.
SKU:EG-25-80731
Categories:Oil & Fluids, Additives, Greases & Lubricants, Gear Oils, Power oil, Engine oil, Break oil, Cleaners, Lubricants & Solvents, Cycle Engine Oil
Tags:MJL Bangladesh, Full Synthetic Car Oil, Mobil 1 0W-40, Engine Oil for Petrol Cars, 1L Engine Lubricant
Advanced Full Synthetic Motor Oil
Mobil 1™ 0W-40 Triple Action Power+ is the ultimate full synthetic engine oil delivering outstanding engine Performance, Protection, and Cleanliness with the added benefit of Fuel Economy.
Features and Benefits
Why these matter for your engine:
Features | Advantages and potential benefits |
PERFORM: Long lasting power. | PERFORMANCE: Reduces the stress of daily wear and harsh conditions for longer engine life. |
PROTECT: 30X* better protection for high temperatures. | PROTECTION: Guards against extreme temperatures to prevent breakdowns. |
CLEAN: Prevents 99.9%** of the harmful acid contaminants that damage your engine. | CLEANLINESS: Prevents buildup of contaminants and sludge for a cleaner engine. |
PLUS: Increases engine efficiency for advanced fuel economy when switching from higher viscosity oils. |
*Based on Sequence IIIH, against API SP specification
**Based on TBN, against TAN in used oil
Applications
Mobil 1™ Triple Action Power+ is suitable for use in petrol, diesel, and hybrid vehicles. Always check your owner's manual for the recommended viscosity grade and specifications for your particular vehicle.
Specifications and Approvals
This product has the following approvals:
MB-Approval 229.3
MB-Approval 229.5
VW 502 00
VW 505 00
NISSAN Genuine Performances
Porsche A40
This product is recommended for use in applications requiring:
API CF
VW 503 01
This product meets or exceeds the requirements of:
API SP
API SN PLUS
API SN
ACEA A3/B4
Fiat 9.55535-M2
Properties and Specifications
Grade | SAE 0W-40 |
Total Base Number, mgKOH/g, ASTM D2896 | 12.5 |
Ash, Sulfated, mass%, ASTM D874 | 1.2 |
Flash Point, Cleveland Open Cup, °C, ASTM D92 | 233 |
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 | 77 |
Hi-Temp Hi-Shear Viscosity @ 150 C 1x10(6) sec(-1), mPa.s, ASTM D4683 | 3.6 |
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 | 13.5 |
Density @ 15.6 C, g/ml, ASTM D4052 | 0.839 |
Viscosity Index, ASTM D2270 | 180 |
Mini-Rotary Viscometer, Apparent Viscosity, -40 C, mPa.s, ASTM D4684 | 28200 |
Pour Point, °C, ASTM D97 | -45 |
Health and Safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx.
All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
Your email address will not be published. Required fields are marked *
Please login to write review!
Looks like there are no reviews yet.