Mobil™ ATF 220 Syn Tech | Automatic Transmission Fluid
High-performance ATF for vehicles requiring Dexron II/IID
Also suitable for hydraulic systems and off-highway equipment
Provides smooth shifting and wear protection
Excellent low-temperature fluidity and foam control
Meets Ford, GM, MB, and Bosch TE-ML 09 specs
Mobil™ ATF 220 Syn Tech is a high performance fluid for automatic transmissions in vehicles requiring Dexron II/IID. It is also used as a hydraulic fluid in unique applications. Mobil ATF 220 Syn Tech is formulated from high-quality conventional base oils combined with a special additive system including viscosity index improvers, antioxidants, and defoamants providing smooth and controlled friction/wear characteristics. The product provides consumers an excellent driving experience even in broad range of driving conditions in a wide variety of automobiles requiring Dexron II/IID specifications.
Features
Advantages and Potential Benefits
Good thermal and oxidation stability
Resists lacquer, sludge and deposit formation to keeps transmissions clean for efficient operation over the fill life.
Good anti-wear properties
Meets the wear requirement to promote longer transmission life.
Excellent low-temperature fluidity
Assist in improved start-up and clean fast lubrication at low ambient temperatures.
Effective foam control properties
Smooth and lasting shift feel and reduced fluid loss in severe service-operating conditions.
Compatible with all common seal materials used in Type IID transmissions
Maintains effective leakage control.
Applications: Mobil ATF 220 Syn Tech is recommended for some automatic and manual transmissions in passenger cars and light trucks specifying Dexron II/IID level performance as well as the related power steering systems. It is also suitable for use in some special hydraulic systems in farm equipment and other installations having similar fluid requirements. It is recommended that the user consult the manufacturer's requirements.
Off-highway transmissions, power steering, and other hydraulic systems
Industrial hydraulic systems and components
Specifications and Approvals:
Ford ESR-M2C163-A2
GM DEXRON II
GM DEXRON IID
GM Type A Suffix A
MB 236.7
R. Bosch AS TE-ML 09
Properties and Specifications:
Flash Point, °C, ASTM D92
229
Kinematic Viscosity @ 40°C, mm²/s, ASTM D445
40.5
Kinematic Viscosity @ 100°C, mm²/s, ASTM D445
7
Pour Point, °C, ASTM D97
-42
Color, Visual
Red
Density @ 15°C, g/cm³, ASTM D4052
0.8624
Viscosity Index, ASTM D2270
131
Brookfield Viscosity @ -40°C, mPa.s, ASTM D2983
41200
Health and Safety: Use as directed. Dispose of used product responsibly. All trademarks used herein are trademarks or registered trademarks of Exxon Mobil Corporation or one of its subsidiaries unless indicated otherwise.
Add your review
Your email address will not be published. Required fields are marked *
